Numerical study of flow distribution uniformity for the optimization of gradient porosity configuration of porous copper fiber sintered felt for hydrogen production through methanol steam reforming micro-reactor

A macroscopic numerical method is proposed to study the flow distribution uniformity of a novel porous copper fiber sintered felt (PCFSF), which has gradient porosities and was developed as the methanol steam reforming micro-reactor catalyst support for hydrogen production for fuel cell applications. The macroscopic porous media developed by the ANSYS/FLUENT software is used to represent the PCFSF. Our results indicate that the gradient porosity can reshape the flow distribution of PCFSFs greatly, thus producing significant influence on their performance. It is further revealed that, for a PCFSF with a determined gradient porosity configuration but different reactant feed directions, the velocity uniformity can be used as a quantitative criterion to evaluate the performance of hydrogen production. Furthermore, new gradient PCFSFs are produced according to the flow distribution of original gradient PCFSFs. The preliminary experimental results of the new gradient PCFSFs of 0.8-0.9-0.7 and 0.7-0.9-0.8 exhibit better methanol conversion and H₂ flow rate. This indicates that the numerical method can be used for the optimization of PCFSFs' gradient porosity configuration, which consists of the shape and position of the interfaces between different porosity portions, the number of interfaces and the porosity distribution in different portions.     

水下循迹航行器水动力学性能数值研究

为了研究低速水下循迹监测航行器的水动力学性能数值计算问题,采用FLUENT软件和SST剪切应力输运模型,通过雷诺时均N-S方程分析流速一定的情况下,取不同攻角、不同水平舵角作为来流条件,研究未安装推进器以及安装推进器且其安装位置不同时,航行器的升力系数、俯仰力矩系数、表面压力分布和流场速度的变化规律。结果表明:在未安装推进器以及推进器的安装位置不同时,随着攻角的变化,升力系数呈线性变化,俯仰力矩系数呈非线性变化;随着水平舵角的变化,升力系数和俯仰力矩系数呈线性变化。当推进器安装在航行器头部时,对航行器流场压力和流场速度变化影响最大;当安装在航行器尾部时,对二者影响最小。对于低速航行器,应尽量将推进器安装在中间靠后位置,以提高航行器的水动力性能。升力系数的试验结果与数值仿真结果之间最大相差7. 51%,阻力系数的试验结果与数值仿真结果最大相差5. 84%,均吻合较好。研究结果可以为低速水下循迹航行器的优化设计和发展提供理论参考。     

表面形貌对粗糙接触界面流体润滑特性的影响

为探究不同表面形貌对粗糙接触界面液体润滑特性的影响，基于有限差分法结合雷诺方程和膜厚方程，研究阶梯形貌、波纹形貌、随机形貌和峡谷形貌4种不同粗糙接触界面液体润滑时的载荷分布及规律。研究发现：4种粗糙表面的三维载荷分布规律都与其表面形貌相对应，在波“峰”处载荷大，摩擦力随载荷的增大而增大，在波“谷”载荷小，摩擦力随载荷减小而减小；4种粗糙表面的载荷随表面展开面积比的变化趋势却有所不同；随表面展开面积比的增大，阶梯形貌表面的载荷呈线性增大，波纹形貌表面的载荷基本不变，随机分布形貌表面的载荷呈增大趋势，峡谷形貌表面的载荷呈先增大后减小的变化趋势。研究结果可以进一步补充现有表面形貌表征和流体润滑等相关研究理论。     

Wall thickness error prediction and compensation in end milling of thin-plate parts

End milling has been widely adopted to machine the thin-plate parts that play increasingly important role in the aerospace industry, due to the advantages of high machining accuracy and fine machined surface quality. In this paper, a systematic method is proposed to predict and compensate the wall thickness errors in end milling of thin-plate parts. The errors are caused by the static deflections induced by the varying cutting force imposed on the weakly rigid part. To improve the efficiency of computing the part deformation, a novel FE model is firstly developed by combing the methods of substructure analysis, special mesh generation and structural static stiffness modification. Then, the time- and position-dependent deformations of the part are calculated based on the proposed FE model to predict the wall thickness errors left on the finished part. It reveals for the first time that the surface topography of the finished thin-plate part is formed by the repeated cutting with the bottom edge of the cutter (BEC) in end milling. Owing to the coupling between the axial cutting depth (ACD) and the force-induced deflection, the modified ACDs for compensation of the static wall thickness errors are finally determined by an iterative adjustment method. The proposed method is verified by three-axis end milling experiments. The experiment results show that the predicted wall thickness errors match well with the really measured ones, and the errors are reduced by 77.18% with the help of the proposed compensation method. Moreover, the proposed FE model reduces the computational time elapsed for error prediction by 67.44% as compared with the benchmark FE model.     

滨海基岩矿床安全开采合理隔离层厚度的确定

针对滨海基岩矿床安全开采合理隔离层厚度留设问题，基于材料力学、结构力学等共七种理论计算方法综合确定隔离层厚度，利用点柱式上向水平分层充填法建立三维数值计算模型，通过结合FLAC3D数值模拟软件，分析理论计算结果的合理性，研究不同中段开采充填情况下第四系底部的稳定性特征，最终得出安全开采所需的隔离层厚度必须在12m以上，合理的开采上限必须在-57m以上。通过分析数值计算模型第四系底部的沉降变形，发现第四系底部最大沉降集中于中间采场 ，最大沉降量为13.73mm。研究成果为滨海基岩矿床安全开采，提高资源回采率提供了有益指导。     

Chicken breast quality – normal,pale, soft and exudative (PSE) and woody – influences the functional properties of meat batters

Three classes (normal, PSE‐like and woody, thirty for per class) of fresh chicken breast meats were selected from a Chinese processing plant. Then, three classes of chicken breast meats were used to prepare meat batters and meatballs. This study investigated the effects of three classes of chicken breast meat on the physicochemical properties, water distribution, protein secondary structures and microstructures of meatballs. PSE‐like and woody meatballs both had lower water holding capacity and textural properties than normal meatballs. Furthermore, the free water mobility and proportion in PSE‐like and woody meatballs were increased (P < 0.05). According to near‐infrared spectroscopy results, the intensity of the 1940‐nm bands of PSE‐like and woody classes both increased. Both PSE‐like and woody meatballs formed more aggregated gel matrices than normal class. PSE‐like and woody classes had higher α‐helix and lower β‐structure contents (P < 0.05). Overall, compared with normal meatballs, PSE‐like and woody meatballs showed inferior functional properties.     

一种相位测试用曲口面天线的设计与应用

相位测试技术可满足不同外形天线罩的在线测试需求。通过数值仿真,设计最佳变换曲线完成矩形 传输波导与圆形辐射天线的拟合连接,能够有效降低天线驻波比,实现测试探头的高增益收发,提升测试有效性。 在维持驻波比参数前提下,对天线口面弧线给予二次曲率调整,可以适应不同外形天线罩的测试稳定性要求。根据 仿真结果加工的低驻波比反射相位测试天线,已应用于多个型号天线罩成型中的相位在线测试,提高了监控的有效 性,验证了设计仿真结果的正确性。     

5G基站供配电勘察设计思路的调整分析

针对5G基站设备相对于以往2G/3G/4G设备的变化,面向一线勘察设计人员,阐述5G基站在供配电需求方面功耗增大、供电方式多样化、供配电改造工作量和难度加大等相应变化,归纳相应的勘察前期准备工作要点,分析在实际工作中可能面临的外市电引入改造、供电方式选择的多样性、新型锂电池应用等重点、难点,介绍理想的5G供配电模式及发展方向,最后提出5G基站供配电勘察设计工作思路调整的建议。     

配电线路绝缘包裹机器人研制

在介绍国内外输电线路现有机器人研究基础上，针对配电线路绝缘修复领域短板，开发了一套能够在线修复配电线路绝缘皮损伤的包裹机器人。首先，对绝缘包裹机器人的机械结构进行了设计研究，包括行走装置、升降装置和柔性输送与包裹装置；然后，开发了相应的控制系统，包括无线通讯、视觉系统等，并对其进行了抗干扰试验和耐压试验，试验结果合格；最后，通过现场绝缘包裹测试完成了机器人的功能性与可靠性验证。本项目所研发的机器人突破了在线修复、柔性包裹等技术瓶颈，解决了人工修复带来的一系列问题。样机通过现场带电包裹试验，绝缘包裹效果符合行业标准要求，达到了预期效果。     

Numerical electric field analysis of capacitance and potential in space for estimation of permittivity distribution

We have been studying on measuring capacitance and potential using long‐distance electrode for estimating a permittivity distribution. The estimating method of permittivity distribution was proposed using finite element method (FEM) and genetic algorithm. However, the measurement accuracy was not reviewed. In this paper, we carried out numerical analysis using FEM in case of change of diameter, position, and permittivity of a rod of dielectric and discussed the measurement accuracy of capacitance and potential.